Shanghai Medic Industry Co., Ltd.
Products
Contact Us
  • Contact Person : Mr. Huang Cheng
  • Company Name : Shanghai Medic Industry Co., Ltd.
  • Tel : 0086-021-51086783
  • Fax : 0086-021-52682133
  • Address : Shanghai,Shanghai,Room 5A12, No. 2, Lane 3856, North Zhongshan Road
  • Country/Region : China
  • Zip : 200063

Model BM-III SWING TYPE FRICTION COEFFICIENT DETERMINATOR

Model BM-III SWING TYPE FRICTION COEFFICIENT DETERMINATOR
Product Detailed
Related Categories:Testing Equipment
Higher requests are aked to the road anti-slip performance and detection means of city road and airport runway along with the de

1.1 Instruction:Higher requests are aked to the road anti-slip performance and detection means of city road and airport runway along with the development of the transportation cause. The friction coefficient determinator is developed by relevant scientific research unit and our factory. The instrument is stable and reliable, easy for calibrating, easy for operating, the test data is accurate, it can be compared with foreign product in the same field. This instrument could be used both in the room and field. It is the ideal anti-slip detecting device for high construction curing.

1.2 Principle:BM-III swing type friction coefficient determinator is the dynamic swing impact instrument. It is developed and made in the principle of “the potential energy lose of swing is equal to work to overcome the pavement friction when the pendulum arm slipping on the pavement”.

1.3 Structure:1. Base: it is composed by T-leg, adjusting screw and level bubble. It can adjust the instrument, do the function of supporting.2. Column: it is composed by column, elevating system, guiding post and instrument handle. It is used for elevating and fixing the swing head position.3. Release switch: it is fixed on the cantilever. It is used for keeping the balance position of the swing post and releasing the pendulum to drop.4. Turing system: including fastening handle, pendulum axis, steering knuckle and bearing. It does the functions of connecting the swing, fixing the position, making sure it swing in the plane freely.5. Indicate system: including needle felt collar, holddown cover, needle adjusting screw and scale plate. The neede can indicate the swing value directly.6. Pendulum head: it is composed by upper and lower connector, swing post, spring, lever, lifting handle, hammer shell, slipping unit, rubber sheet (76×25.4×6.35mm). it can regulate the torque to the swing center, regulate the pressure to the pavement, keep the balance of swing head in the direction of forward and back, left and right. It is the scale of measuring the friction coefficient of pavement. See the structure in picture 1.

1.4 Main technical parameters:1.Pendulum mass: 1500±30g  pendulum centroid distance: 410±5mm (distance to the swing center)2.Forward static pressure from subber sheet to pavement: 2263g (22.2N)3.Rubber sheet specification: 76×25.4×6.35mm4.Distance between swing center to rubber sheet outer edge: 508mm5.Weight: about 12Kg

1.5 Operating instruction:1. Point choosing: choose five representative detecting points of the left wheel mark on the direction of car moving on the detecting road with the distance of 5-10 meters every detecting point.2. Balancing the instrument3.  Clearing4. Calibrate the sliding length5. determination6. Test result7.  Notice

1.6 Maintenance, keeping and transportation:(1) The swing type friction coefficient determinator is a precision instrument, it must be kept carefully, so that won’t to effect the accuracy. If you are not familary with the structure part, read the operating manual carefully before using, know the structure, function and operating method of every part clearly. Do not dissamble the instrument except the allowed active part or pendulum head for calibrating.(2) Clean all the part of the instrument after operating, put it in the box and keep it in the room where it is aeration-dry, no acid and corrosive and volatile matters.(3) It should be kept and moved in the packing box, except operating or other special case.(4) The instrument must be kept in the transportation box when long distance transportation. No impact or strong shaking when load and unload and transportation.

1.7 Appendix:(1) CalibratingThe instrument should be calibrated once every year. Disassemble the pendulum head from the connecting nut when calibrating. Send it back to tha factory after packing. Contact the factory when the pendulum head is destroyed.(2) Packing lista. Main frame: 1 setb. Operating instruction: 1 copyc. Certificate, warrantee cardd. Rubber sheet: 2 piecese. 126 scale ruler: 1 piecef. Rubber brush: 1 pieceg. Spanner: 14*17mm, 1 pieceh. Crescent spanner: 1 piecei. Watering pot: 1 piece

Model BM-III SWING TYPE FRICTION COEFFICIENT DETERMINATOR



Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.